My Little Karaoke

Sugarcube Corner => Pinkie's Counter => Topic started by: Lyra101 on April 30, 2020, 10:33:10 AM

Title: Cutiemark rings for your microphones
Post by: Lyra101 on April 30, 2020, 10:33:10 AM
Hi there,

you might have seen the cool 3d-prined cutiemark rings the mlk team uses on thier micropones at pony events?

I was really fond of them so I created my own versions of  them to fit to the wired versions of the Singstar microphones.

(https://cdn.myminifactory.com/assets/object-assets/5ea5e4e5b2fd7/images/720X720-mikros2.jpg)

You can download them over there -> https://www.myminifactory.com/object/3d-print-pony-mlp-themed-rings-for-singstar-microphones-119384 (https://www.myminifactory.com/object/3d-print-pony-mlp-themed-rings-for-singstar-microphones-119384)

Just print them, unscrew the top of your microphone and swap them with the original ring.

If you want to see the cutiemark of your favorite character you can either create your own versions using the STEP or Fusion360 files included or drop me a note and I'll see what I can do. (Bonus points if you send a vector of the cutiemark you want along with the note)

Happy printing y'all

Title: Re: Cutiemark rings for your microphones
Post by: Renard on May 02, 2020, 02:52:02 PM
Appreciated, thank you!

As a quick note, the wired microphones are easy to unscrew, the wireless ones not so much - they are full of glue/resin and crack easily (plus they're becoming somewhat rare).
Title: Re: Cutiemark rings for your microphones
Post by: calvinthedestroyer on May 15, 2020, 10:38:03 AM
That's kool!